Click a thumbnail to enlarge it
Click a thumbnail to enlarge it
From its colonial beginnings, California has had a rich and romantic history through the Spanish and Mexican eras. By the 1920’s many Californians began to treasure this heritage, and inspired in the Spanish-Mediterranean architecture, architects throughout the state chose the Spanish design as an appropriate style for many state public and private buildings. Such an epitome of Spanish colonial revival is the Santa Barbara courthouse.
Malibu tiles are named after the California Malibu Potteries of the 1920’s. Malibu tiles are glazed and decorated by hand using a technique called “cuerda seca” or “dry cord”. This technique of decorating ceramic tiles can be traced back to Persia during the XIV century. It implicates that every single drop of colored glaze is carefully applied by the artist using a bulb syringe. In most cases a single tile may have up to ten different colors, and at the same time a mix of matte and gloss glazes. Therefore, extreme attention to detail is required to create a unique and exquisite tile of unparalleled beauty. Typically, Malibu tiles display rich, and intricate Spanish-Moorish motifs evoking a bold, romantic, and dramatic style.
Ceramic tile, particularly hand made and hand decorated tiles, can be found in historic buildings in places such as San Diego or San Clemente; in seaside estates like Santa Barbara, Santa Monica, or Malibu; in canyon villas, such as Rancho Santa Fe, Beverly Hills, and Hancock Park; and bungalows, particularly in Pasadena, North Park (San Diego), and Palm Springs. Malibu ceramic tile collection evokes the California landscape, with a combination of vivid and subtle colors offset by neutrals and matte finishes. It is this combination of mattes and gloss finishes in a vast array of colors that our Santa Barbara ceramic tile becomes rich, vibrantly alive, and harmonious.
• All interiors of residential and commercial wall applications.
• Light-use residential flooring as accents or as a border to define an area.
• Outdoor use in areas where freezing temperatures are not common. Tiles are not frost proof.
• Tiles and grout must be sealed with a penetrating sealer that will form an invisible barrier resistant to moisture and stains.
• Outdoor use is subject to climate conditions and method of installation.
• Not recommended on outdoor installations with potential freezing temperatures.
||V2- Slight Variation
||C1 - Light
||Sanded grout if joint is greater than 1/4 in. or
Non-sanded grout if joint is less than 1/4 in.
||Use penetrating sealer
• For a comparison of variation and crazing degrees refer to Variation and Crazing Details.
Tiles per Square foot:
||Number of tiles
• Industry standard recommends adding on 5-10% additional tile to account for waste, special cuts, or other unforeseen problems. It is recommended to revise measurements and tile quantities with an expert installer.
Care and Considerations:
• Clean with mild cleanser and damp cloth, do not use abrasive cleaners.
• Some glazes such as matte colors are acid sensitive. Do not use cleaners with an acid base since these may cause discoloration.
• For Installation Recommendations refer to our Installation Guide.
No matching colors at the moment