|
Click a thumbnail to enlarge it
Click a thumbnail to enlarge it
|
Mexican Tiles outlet-sale items include discontinued, close-out, overstock, limited production, irregular items, and/or seconds.
NO RETURNS will be accepted on outlet purchases. All outlet sales are final. Quantities are limited and subject to verification. If unable to purchase an item, it means that item has been sold out. All items are sold by the unit. Please note, the picture shown is representative of the item you will receive.
In some instances, you may see a picture showing more than one unit of the same item. Bear in mind all items are sold by the unit, and this DOES NOT mean a set. The pictures showing more than one unit are for illustrative purposes only.
Order Online 24/7. Or call during normal business hours to place your order.
Ships within 2 business days from San Diego, California.
Material: Ceramic
Finish: Hand Painted Talavera. All our sinks have an off-white background.
Shape: Round
Drain Opening: 1.5 in. US Standard
Overflow: 3 Overflow Holes
Installation Type: Drop in or Tile-in
How to Care: Nonabrasive cleaner. Mira Clean #1 is recommended.
Outside Diameter: 16.5 in. (outside dimensions from lip to lip)
Inside Dimensions: 14 in.
Inside Depth: 6 in.
Installing a Mexican Bathroom Countertop Sink
- Since no template is provided with this sink, set the bowl upside down on the countertop and trace the outline, then draw a second line about 3/4 inch inside that line to serve as your cut line.
- Carefully drill a 3/8-inch starter hole inside the cut line. Using a saber saw, begin cutting along the line. After you have completed the cutting the hole, insert the sink into the hole in the countertop to test the fit. Make any adjustments if necessary.
- Place a bead of plumber's putty around the bottom edge of the drain-assembly housing's lip, then press the housing into the drain hole. Attach the gasket and washer, then tighten the locknut. Be careful not to apply to much pressure because the drain hole may break. Remove any excess plumber's putty. Attach the tailpiece to the housing with the slip nut and washer.
- If you haven't already done so, install the faucet. When the faucet is in place, turn the sink upside down and run a bead of silicone adhesive along the underside of the molded lip. Turn the sink over and carefully align it with the countertop's front edge. Press firmly around the lip to form a tight seal. After the adhesive has set, apply a bead of latex caulk around the edge, then smooth it with a wet finger.
- Set the sink in place, firmly pressing down all edges to assure a secure seal.
These tips are meant as a helpful resource. MexicanTiles.com strongly suggests consulting a licensed contractor.
No matching colors at the moment
|
